IMPORTANT GUIDELINES FOR INSTALLATION

STOP & READ BEFORE INSTALLING

1. Before you hang wallpaper, thoroughly prepare your wall – remove old wallpapers and paint, use coating to patch the wall and apply primer.
   
2. Connect all guidelines on the flat surface accordingly to numbering at the bottom of the roll. Make sure the color of the guidelines and pattern are connecting at the edge. Only after full pattern match, start gluing.
   
3. For non-woven wallcoverings we are recommending to use either a heavy duty clear wallpaper paste or premixed vinyl adhesive.
   
4. For even application of the first sheet draw a vertical line using construction level.
   
5. Spread adhesive of 3/64 inch thick for about 1 inch wider than your wallpaper sheet and start to apply first sheet immediately.
   
6. Attach first sheet to the wall accordingly to the vertical line drawn. Smooth with a wallpaper spatula, avoiding excessive friction. Cut the sheet at the corner and remove excessive adhesive. Please note that during gluing, the wallpaper is impregnated with glue and becomes more elastic.
   
7. To glue the joints, level the sheets with a spatula and secure with a stiff roller.
   
8. All other sheets it is necessary to glue edge-to-edge using clause 5-6 of the instruction.
   
9. If the glue gets on the front side of the photo wallpaper, carefully remove it with a damp sponge, avoiding excessive friction. Do not use rags!
   
10. Enjoy your result!
    

If you are unsure about how to install your wallpaper, please do not hesitate to contact manufacturer by email.

📧 sale@lipastick.com