Mural wallpaper Installation procedure

Important guidelines for installation Stop & read before installing

Before proceeding to apply the wallpaper, we kindly advise you to inspect the received wallpaper rolls thoroughly. Carefully unravel and examine the wallpaper to ensure that it meets your expectations in terms of design, pattern, color, and quality.

We emphasise that in the event of any errors, it is imperative not to proceed with the application of the wallpaper or stickers, as filing a complaint will not be possible after application. Your cooperation in this regard is greatly appreciated.

Before you hang wallpaper, thoroughly prepare your wall – remove old wallpapers and paint, use coating to patch the wall and apply primer.

Connect all guidelines on the flat surface accordingly to numbering at the bottom of the roll. Make sure the color of the guidelines and pattern are connecting at the edge. Only after full pattern match, start gluing.

For non-woven wallcoverings we are recommending to use either a heavy duty clear wallpaper paste or premixed vinyl adhesive.

For even application of the first sheet draw a vertical line using construction level.

Spread adhesive of 3/64 inch thick for about 1 inch wider than your wallpaper sheet and start to apply first sheet immediately.

Attach first sheet to the wall accordingly to the vertical line drawn. Smooth with a wallpaper spatula, avoiding excessive friction. Cut the sheet at the corner and remove excessive adhesive. Please note that during gluing, the wallpaper is impregnated with glue and becomes more elastic.

To glue the joints, level the sheets with a spatula and secure with a stiff roller.

All other sheets it is necessary to glue edge-to-edge using clause 5-6 of the instruction.

If the glue gets on the front side of the photo wallpaper, carefully remove it with a damp sponge, avoiding excessive friction. Do not use rags!

Enjoy your result!

If you are unsure about how to install your wallpaper, please do not hesitate to Contact us